SFP Precision Parts Store

Home › Retaining Ring › [3-5] E-Ring

中文English日本語

[3-5] E-Ring

94 items。🔍 Filter in the interactive catalog

About this category

E-shaped retaining rings that push into the shaft groove from the side rather than sliding over the shaft end - the choice when both ends of the shaft are already assembled. Thin and compact, common in small mechanisms and shaft location.

Standards DIN 6799

How to choose

Measure the shaft outside diameter, not inside the groove, which reads small.
E rings often come in more than one size for the same shaft diameter - check the size table rather than going by shaft diameter alone.
They push on from the side without special pliers, but use an E-ring tool to remove them so they do not fly off.
Axial load capacity is lower than an S ring - use an S ring where loads are high.

Specifications at a glance

This category lists 93 items. Size and material coverage below — all stocked in Taiwan.

Size range	Shaft / bore Ø 0.6 – 30 mm
Material	Carbon steel 55, Stainless 38
Unit system	92 metric / 1 inch
Type	Stainless Steel E-Ring 36, Black Oxide E-Ring 34, Nickel Plated E-Ring 17, Black Oxide E-Ring (美規5133) 3, Black Oxide E-Ring (DIN6799) 1, Stainless Steel E-Ring (DIN6799) 1, 條裝 Nickel Plated E-Ring 1
Unit price	NT$ 0.3 – 80(excl. tax; 97.8% of items priced)

SS301 E型 Retaining Ring E2.5 Black Oxide E型 Retaining Ring E1.2 Carbon Steel E型 Retaining Ring E1.5 Phosphate E-Ring 1/2" (9.78*20.57*1.1)Carbon Steel E型 Retaining Ring E10 Carbon Steel E型 Retaining Ring E11 (Thickness 1.0)Carbon Steel E型 Retaining Ring E12 Carbon Steel E型 Retaining Ring E13 (Thickness 1.2)Carbon Steel E型 Retaining Ring E14 (Thickness 1.5)Carbon Steel E型 Retaining Ring E15 Carbon Steel E型 Retaining Ring E16 (Thickness 1.5)Carbon Steel E型 Retaining Ring E17 (Thickness 1.5)Carbon Steel E型 Retaining Ring E18 (Thickness 1.5)Carbon Steel E型 Retaining Ring E19 Carbon Steel E型 Retaining Ring E2 Carbon Steel E型 Retaining Ring E2.3 Carbon Steel E型 Retaining Ring E2.4 Carbon Steel E型 Retaining Ring E2.5 Carbon Steel E型 Retaining Ring E20 (Thickness 1.5)Carbon Steel E型 Retaining Ring E21 (Thickness 1.5)Carbon Steel E型 Retaining Ring E22 (Thickness 1.5)Carbon Steel E型 Retaining Ring E24 (Thickness 2.0)Carbon Steel E型 Retaining Ring E25 Carbon Steel E型 Retaining Ring E26 Carbon Steel E型 Retaining Ring E3 Carbon Steel E型 Retaining Ring E3.2 Carbon Steel E型 Retaining Ring E3.5 Carbon Steel E型 Retaining Ring E30 Carbon Steel E型 Retaining Ring E4 Carbon Steel E型 Retaining Ring E5 Carbon Steel E型 Retaining Ring E6 Carbon Steel E型 Retaining Ring E7 Carbon Steel E型 Retaining Ring E8 Carbon Steel E型 Retaining Ring E9 420 Stainless Steel E型 Retaining Ring E2.3 (Thickness 0.6)SS301 E型 Retaining Ring E0.6 (Thickness 0.2)SS301 E型 Retaining Ring E0.8 SS301 E型 Retaining Ring E1.2 SS304 E型 Retaining Ring E1.5 SS304 E型 Retaining Ring E10 SS304 E型 Retaining Ring E11 SS304 E型 Retaining Ring E12 SS304 E型 Retaining Ring E13 SS304 E型 Retaining Ring E14 SS304 E型 Retaining Ring E15 SS304 E型 Retaining Ring E16 (Thickness 1.5)SS304 E型 Retaining Ring E17 (Thickness 1.5)SS304 E型 Retaining Ring E18 420 Stainless Steel E型 Retaining Ring E19 SS304 E型 Retaining Ring E2 Stainless Steel E型 Retaining Ring E2.3 SS304 E型 Retaining Ring E2.5 SS304 E型 Retaining Ring E20 SS304 E型 Retaining Ring E21 SS304 E型 Retaining Ring E22 420 Stainless Steel E型 Retaining Ring E24 SS304 E型 Retaining Ring E25 SS304 E型 Retaining Ring E26 SS304 E型 Retaining Ring E3 420 Stainless Steel E型 Retaining Ring E3 SS304 E型 Retaining Ring E3.2 SS304 E型 Retaining Ring E3.5 (Thickness 0.6)SS304 E型 Retaining Ring E30 SS304 E型 Retaining Ring E4 420 Stainless Steel E型 Retaining Ring E4 SS304 E型 Retaining Ring E5 SS304 E型 Retaining Ring E6 420 Stainless Steel E型 Retaining Ring E6 SS304 E型 Retaining Ring E7 SS304 E型 Retaining Ring E8 SS304 E型 Retaining Ring E9 Nickel Plated E型 Retaining Ring E1.2-NI Nickel Plated E型 Retaining Ring E1.5-NI Nickel Plated E型 Retaining Ring E10-NI Nickel Plated E型 Retaining Ring E12-NI Nickel Plated E型 Retaining Ring E15-NI Nickel Plated E型 Retaining Ring E2-NI Nickel Plated E型 Retaining Ring E2.3-NI Nickel Plated E型 Retaining Ring E2.5-NI Nickel Plated E型 Retaining Ring E3-NI Nickel Plated E型 Retaining Ring E3.2-NI Nickel Plated E型 Retaining Ring E3.5-NI Nickel Plated E型 Retaining Ring E4-NI Nickel Plated E型 Retaining Ring E5-NI Nickel Plated E型 Retaining Ring E6-NI Nickel Plated E型 Retaining Ring E7-NI Nickel Plated E型 Retaining Ring E8-NI Nickel Plated E型 Retaining Ring E9-NI Carbon Steel E-Ring DIN6799-2.3 (0.6t)SS301 E-Ring DIN6799-4 (0.7t)Black Oxide E-Ring 5133-12 (1/8")Black Oxide SK7 Carbon Steel E-Ring 5133-9 (3/32")Black Oxide E-Ring 5133-43 (7/16")"條裝" Nickel Plated E型 Retaining Ring E2